CH120 Input AC 100-240V Smart Car Battery Chargers

Model Number: CH120/W Brand Name: Eoutil Key Specifications/Special Features: CH120 Input AC 100-240V Smart Car Battery ChargersFeatures and Functions● Input: AC100V - 240V, 50Hz/60Hz● Three charging steps: Bulk, Absorption, Float● Design with switching mode circuit● Protection functions：Over thermal protectionOutput short-circuit protectionPolarity-reverse protection

Safety Instructions
Please read and understand all of the following instructions, prior to using this tool.

Warning
● Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging.
● Against recharging non-rechargeable batteries
● For indoor use, or do not expose to rain.
● When the charger making the connections to automobile batteries. The battery terminal not connected to the chassis has to be connected first. The other connection is to be made to the chassis, remote from the battery and fuel line.
● Instruct the child not to try and recharge non-rechargeable batteries because of the danger of eruption.
● If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.

Direction for Use
Please turn off all electric equipments which connect to battery. Be sure the charger only works with battery.
Check the polarity of battery. The ”+” symbol indicates the corresponding pole is positive piece which connects to red clamps. The “-“ symbol indicates the corresponding pole is negative piece which connects to black clamps.
Connect charger battery clamps to charger leads. Then connect charger red clamps to battery positive piece and connect charger black clamps to battery negative piece.
If red led lights, swap battery red clamps and battery black clamps.
Connect the charger to AC power.
Press button to select suitable current.
After charging, disconnect the battery charger from the supply mains. Then remove the chassis connection and then the battery connection.