Fill from the topcap glass tank DIY rebuildable coil W22 electronic cigarette rba

Model Number: W22 electronic cigarette rba Brand Name: MLIFE Key Specifications/Special Features: W22 atomizer descriptionThe atomizer is power oil storage DIY atomizer with filling .It is a new product between electronic components and food products.The biggest difference from E-cigarette and traditional cigarette is the E-cigarette without burning, but through E-liquid atomization device to generate a lot of vapor, then let the smoker have the same feeling of smoking tobacco.W22 atomizer Operation instruction1 Refill oil : hold the mod to unscrew top cover by clockwise, then reill the oil from the hollw hole of left and right sides , and tighten the cover in same direction.
2 screwing the atomizer clockwise to battery,thencan be used.
Remark: pls confirm the correct battery power before u using
3 Heat wire Install: use a screwdriver to loose two nuts, fixed both end of heat wire, ensure that coil in the midline to balance the hole of bottom, but cannot touch the base, otherwise may cause short circuit;
4 Warm tips :This productdefaults to use 0.5Ωresistanceheat wire , so the best to use with battery power at 20 w - 60 w. If use with different resistanceheat wire,pls check DIY application range as reference before use .
Wearing organic cotton through into the heat wire ,located in the middle ,and the edge length over unilateral base form 5 mm to 10 mm advisably .Drop a few oil into coil to infiltrate the organic cotton, make both end of organic cotton prolapsed naturally
5 make atomizer cover fix on the coil and et atomizer coil fix on the base

W22 atomizer Attention

1 Working temperature：-10°C—40°C。
2 Working humidity：20%—80%，Please do not put product in damp environment, so as not to affect the product feeling experience.
3 Light to take light put, do not drop, so as not to damage the glass.